Products in Building & Construction: Surfactant (Cationic)

Diamine OLBS is an active adhesion agent for hot bitumen, cut back bitumens, soft bitumens and emulsions used in surface dressing (chipseal), and cold and warm mixes including those using reclaimed materials.

Redicote EM44 is a liquid emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat. Emulsifier for phosphoric acid slurry and micro surfacing systems.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Redicote C-2914 is a liquid adhesion promoter for hot and warm mix.

Use of Redicote E-33 together with regular cationic emulsifiers generally increases emulsion viscosity.

Rediset LQ-1102C is a compaction aid for hot and warm mixes. Rediset LQ-1102C allows a reduction in mixing and paving temperatures while providing built in anti-stripping effect.

Redicote E-11 HF is a emulsifier for cationic slow set asphalt emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Redicote C-450-S is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Arquad T-50 HFP is a cationic surfactant based on tallow amine - Tallowtrimethylammonium chloride. Emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Redicote E-85 is a emulsifier for rapid and medium setting cationic bitumen emulsions.

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Perma-Tac 99 is a liquid antistrip for hot mix asphalt.

Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-7100 is a faster setting Emulsifier for Cold In-Place recycling (CIR). Emulsifier for cationic slow-setting emulsions suitable for cold mix, tack, prime, slurry seal and dust control. Can be used as an anionic emulsifier in tack and prime coat emulsions.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote C-450-1 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.

Wetfix AP47 is a low hazard adhesion promoter and warm mix additive.

Redicote C-320 is a emulsifier for cationic quick-set bitumen emulsions formulated with phosphoric acid for quick-traffic slurry and microsurfacing

Redicote C-320E is a emulsifier for cationic slow-set bitumen emulsions formulated with phosphoric acid for quick-traffic slurry and microsurfacing.

Redicote E-27 is a liquid cationic emulsifier for tack coats and prime coats.

Redicote E-4850 is a emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-4875 NPF is a emulsifier for cationic slow setting emulsions suitable for tack, prime, slurry seal, cold mix and sealcoats.

Redicote C-500-1 is a emulsifier for cationic quick-set bitumen emulsions for quick-traffic slurry and micro surfacing.

Wetfix AP17 is a adhesion promoter for hot and warm mix.

Redicote E-605 is a emulsifier for cationic medium-setting emulsions and tack coats. Emulsifier for oils and soft bitumen used in dust control emulsions.

Redicote 103 is a emulsifier for high viscosity rapid and medium setting cationic bitumen emulsions.

Redicote 404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Kling Beta 2914 is a liquid adhesion promoter for hot and warm mix.

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Redicote E-16LV is a liquid active adhesion promoter.

Duomeen HT is an active adhesion promoter in solid (pellet) form for hot bitumen, cut back bitumen or soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Wetfix 312R is a 100% active lower odor antistrip that provides the best value for the money.