Products in Industrial: Carbon Fiber

AGC Chemicals Americas, Inc. Fluon+™ FC 491 (340491020) is a 25% carbon and graphite filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Carbon & graphite powder are added to PTFE to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

BB 2100 is a standard modulus carbon fiber precision cut from tow, with typical mechanical properties. These fibers are ideal for introduction into Bulk Molding Compound (BMC) materials, injection molding and pellet production for a wide range of end-use applications. Fibers come with standard epoxy-based sizing chemistry, optimized for use with most thermoset and thermoplastic resin systems. BB 2100 fibers are available as first quality certified materials as well as at discount without certifications. BB 2100 fiber is precision cut according to each customer specified length (e.g. 0.125, 0.25, 0.50 through 2.75" fiber lengths).

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Procotex CF-6mm is a mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

HS Carbon Fiber UD100H60 is a E3 Matrix System with a precursor as PAN.

ZOLTEK’s Type-45 chopped fiber is high bulk density values which allow for cleaner and more consistent flow rates, maintains its integrity from the package, into, and through the hopper and distributes easily during compounding, improving process and product performance and has excellent mechanical and electrical properties.

HS Carbon Fiber UD125H60 is a E3 Matrix System with a precursor as PAN.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Carbon fabrics 3607 is a balanced plain weave fabric.

Textile Products Carbon 3K Fabric Style #4245 Endless application capabilities for woven materials, Used in Aircraft, Medical, Fiberglass, Marine, Industrial, Recreational, Life Protection.

Procotex CF-0.5mm : mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

ACM C600B is Multiaxial Carbon Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

Textile Products Carbon 3K Fabric Style #4365 Endless application capabilities for woven materials, Used in Aircraft, Medical, Fiberglass, Marine, Industrial, Recreational, Life Protection.

C-TAPE™ U300P 12K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 318 gsm. It is made using 12K HS carbon fiber. This carbon tape is used primarily for local reinforcement with epoxy resin. *FOE fiber available upon request

HexTow® IM6 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM6 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.

SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.

TC-09-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

Carbon UDs DW0164 is made of UD fabric by plain weaving style.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Procotex CF-MLD180 is a mixture of all origin carbon and graphite ex-PAN fibers, obtained from pure carbon fibers, selected and milled for compounding. Its sizing, wich can vary is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints..; its compatibility needs to be checked on each new batch and for each new application.

TC-07-T is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

AKSACA™ AC 2101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

QISO® H-59 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® H-59 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

Carbon fabrics 13624 is a balanced plain weave fabric.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

QISO® HW-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® HW-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

IM Carbon Fiber UD125 H60-MR70 is a E3 Matrix System with a precursor as PAN.

C-L 1800 is a carbon fiber type.

Concordia Fibers SGL Group Sigrafil C40 is a Carbon Fiber which is used in Commercial/Industrial/ Consumer.

Hybrid Carbon / E Glass 4633 is a balanced plain weave fabric.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

IM Carbon Fiber UD200H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

Carbon Fabrics 38193 is made of carbon fiber by plain weaving style.