Products in Industrial: Leather

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Product Attributes:Low shrinkage : <2% (180⁰C, 30 minutes),Better dimensional stability.Higher yield in downstream processSpecial Name: Recron® Fiberfill Low-shrinkDenier Range: 3Cut Length: 51, 64,76Speciality: Siliconised/ Non-Siliconised

Product Attributes:Multi-Products range serves all non-woven requirementsHigh Strength to achieve best durabilityOptimum finish for best Needle weavibilitySpecial Name: Recron® Non-woven SolutionsDenier Range: 1.5, 1.8, 2.2, 3.0, 4.0, 6.0Speciality: Non-Siliconised/ Slick

BIO-SOFT® N91-2.5 is a c9-11 linear alcohol ethoxylate featuring a low hlb. This versatile product offers rapid wetting, low foam, emulsification, and detergency. Its applications span laundry, textiles, hard surface cleaning, machine-based cleaning, paints, carpet cleaning, and institutional and industrial cleaning contexts.

BIO-SOFT® N91-6 is a c9-11 linear alcohol ethoxylate with a low pour point and high hlb, excelling in fast wetting, moderate foam, emulsification, and detergency. Applications include laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It satisfies the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

MAKON® DA-6 is a high-active nonionic surfactant that excels in emulsification, moderate foam generation, detergency, and excellent wetting properties. It has a broad spectrum of applications, including laundry, textiles, hard surface cleaning, paints, carpet cleaning, hand dishwashing, and institutional and industrial cleaning formulations. Importantly, makon da-6 aligns with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

STEPANTEX® DA-6 is a highly active nonionic surfactant that provides emulsification, moderate foam, detergency, and excellent wetting. This product finds application in laundry, textiles, hard surface cleaning, paints, carpet cleaning, hand dishwashing, and institutional and industrial cleaning applications. The product is kosher-certified.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

STEPANTEX® VL 90 A stands as a diester fabric softener quaternary, delivering excellent softening, antistatic, and rewetting properties. This cationic surfactant paste is applicable in household and industrial cleaners and finds a diverse range of applications, including metal cleaning and polishing compounds, cutting oils, textile auxiliaries, leather conditioners, water repellents, shoe polishes, emulsifiers, paper treatment, and clays.

STEPANTEX® VM 85 G is a cationic surfactant suited for the formulation of household and industrial fabric softeners from 3% viscous to 20% fluid-active concentrations. This ester quat can also be used in many other applications, such as metal cleaning and polishing compounds, cutting oils, textile auxiliaries, leather conditioners, water repellents, shoe polishes, emulsifiers, paper treatment, and clays.

WETSOFT® NE 430 is a nonionic macroemulsion concentrate of a self-dispersing hydrophilic silicone fluid. It is used for the hydrophilic treatment of fibers and textiles of all kinds. On hydrophilic substrates such as cellulosics, the hydrophilic properties are usually not affected, while hydrophobic substrates such as polyesters typically experience a clear improvement in wetting properties.

POLYCAT® 557 is a catalyst that belongs to the category of standard TEDA (triethylenediamine) and DBU (1,8-diazabicyclo[5.4.0]undec-7-ene)-based catalysts. It is specifically designed to deliver high-performance foam reactions, catering to the requirements of applications like spray foam. Additionally, it is utilized in 2K PU (polyurethane) leather applications.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed pr

Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather fin

BioPTMG 650 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 650 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 3000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 3000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 2000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 2000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 1000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 1000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

SULF-N® Ammonium Sulfate - Industrial Grade (21-0-0-24S) is a research-tested and field-proven source of readily-available sulfate sulfur and loss-resistant ammonium nitrogen.

WACKER® Finish WR 301 is a reactive aminoethyl-aminopropyl-functional polydimethylsiloxane that provides a soft, drapable, and elastic touch to woven and knitted fabrics. It enhances wash-and-wear properties, crease recovery angle, sewability, tear strength, and reduces abrasion loss. These effects are quickly noticeable after washing and dry cleaning.

WACKER® Finish WR 210 is a reactively modified aminofunctional polydimethylsiloxane for use in non-yellowing and moisture-neutral textile finishing. WACKER® Finish WR 210 is particularly suitable as an active substance in softener formulations for the impregnation of fibers and textiles. WACKER® Finish WR 210 imparts a soft, drapable, and elastic touch to woven and knitted fabrics.

POWERSOFT® PE 280 is a composition that includes a self-dispersing aminofunctional silicone fluid. It is a cationic silicone softener specifically developed for exhaust applications and can be used on common fibers such as cotton, polyester, polyamides, and their blends. What sets POWERSOFT® PE 280 apart from regular silicone-based softeners is its exceptional stability in the presence of alkali, salt, and high-shearing conditions.

WACKER® Finish WR 1200 is a reactive aminoethyl-aminopropyl-functional polydimethylsiloxane that imparts a very soft, drapable, and elastic touch to woven and knitted fabrics. It is widely regarded as the best softening agent for PES and other synthetic fibers. In addition to softness, WACKER® Finish WR 1200 also enhances the wash-and-wear properties, crease recovery angle, sewability, tear strength, and abrasion loss of the treated fabrics. These effects are quickly noticeable, even after washing and dry cleaning processes.

ADVALON® CI 40 is a nonionic semi-microemulsion of a reactive polysiloxane. It is specifically formulated as a fabric softener for polyester materials, providing a soft and pleasant feel. Additionally, it enhances the intensity of dark color shades in the fabric.

ADVALON® CF 3295 is a macroemulsion finish for "PAN" carbon fiber precursors with approximately 20% solids content. It is formulated using proprietary silicone technology. The purpose of ADVALON® CF 3295 is to provide excellent wetting and penetration, ensuring uniform lubrication between fibers and metal during fiber processing. It also prevents the fusion of fibers. Additionally, the active substance in ADVALON® CF 3295 acts as an antistatic agent due to its inherent conductivity.

WACKER® Finish WR 1300 is a reactive aminoethyl-aminopropyl functional polydimethylsiloxane. When used in a softener formulation, it has minimal impact on the degree of whiteness. Additionally, it does not adversely affect the shade or color-fastness properties of colored goods. In formulations for fill fiber finish applications, WACKER® Finish WR 1300 provides excellent slickness and resilience to the fibers.

WACKER® Finish WR 1100 LV is a reactive aminoethyl-aminopropylfunctional polydimethylsiloxane with a reduced level of cyclic siloxanes. It is specifically recommended as an active substance in softener formulations for impregnating fibers and textiles, providing a very soft, drapable, and elastic touch to woven and knitted fabrics.

WETSOFT® AE 200 is a modified aminofunctional polydimethylsiloxane used for non-yellowing, hydrophilic textile finishing. It is an excellent active ingredient in hydrophilic softeners for finishing all kinds of fibers and textiles. WETSOFT® AE 200 provides woven and knitwear, particularly nonwovens and terry, with a soft and supple hand.

WACKER® IM 11 is a polydimethylsiloxane having carbinol functional groups in α,ω-position. WACKER® IM 11 can be used neat, in a solution, or as an emulsion. Suitable solvents for WACKER® IM 11 are aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters, higher alcohols, and ketones.

POWERSOFT® AE 61 is a concentrated emulsion used for preparing silicone macro-emulsions. It consists of a reactive amino-modified silicone fluid and a base compound. Silicone macro-emulsions formulated with POWERSOFT® AE 61 are ideal for impregnating various types of fibers and textiles. These emulsions enhance the softness, drape, and elasticity of fiber materials, including cotton (CO), polyester (PES), viscose (CV), and their blends.

SIPELL® AE 34 is a non-ionic microemulsion of an amino-functional silicone fluid. It is primarily used as a hand-modifying additive to provide a pleasant, soft-soap hand feel. SIPELL® AE 34 finds its main application in the treatment of leather for cloth and furniture, where it helps enhance the tactile properties and softness of the treated material.

WACKER® Finish WR 1300 LV is a reactive aminoethyl-aminopropyl functional polydimethylsiloxane with a reduced level of cyclic siloxanes. It is specifically designed as an active substance in softener formulations for the impregnation of fibers and textiles. WACKER® Finish WR 1300 LV is highly regarded as the top softening agent for cotton fabrics and knitwear made of cotton or cotton/PES blends.

WETSOFT® NE 580 is a predominantly nonionic microemulsion concentrate of a hydrophilic silicone fluid. It is used for the hydrophilic treatment of fibers and textiles of all kinds. On hydrophilic substrates such as cellulosics, the hydrophilic properties are usually not affected, while hydrophobic substrates such as polyesters typically experience a clear improvement in wetting properties. WETSOFT® NE 580 provides woven goods and knitwear with a silky soft, supple, and smooth hand.

JETSOFT® Concentrate is a self-dispersing aminofunctional silicone fluid that can be diluted with water. It is specifically designed to be used as an active substance in softener formulations for the impregnation of fibers and textiles. By using JETSOFT® Concentrate, woven and knitted fabrics gain a characteristic, soft, and natural hand with low surface smoothness.

SIPELL® CE 27 is a flowable, water-based dispersion of precured silicone rubber. It is primarily used as an additive to impart a pleasant, greasy hand feel. In addition, SIPELL® CE 27 is utilized to enhance the abrasion resistance of finished leather goods.